Water Treatment Plant
Water Treatment Plant
Current Stage: Execution
Ongoing Water & Wastewater Projects Under Execution
Live Ongoing Projects by WTE
Explore WTE projects currently under engineering, manufacturing, installation and commissioning across STP, ETP, RO, DM, UF, OWS, ZLD and water-reuse systems. This page highlights live project categories, capacities, locations, industries and current execution stages.
Live Project Overview
WTE Ongoing Projects Show Active ExecutionAcross Water & Wastewater Treatment Sites
This page is focused on WTE projects where work is currently in progress.
It covers live water and wastewater treatment assignments moving through design review, drawing approval, procurement, manufacturing, dispatch, site installation, pre-commissioning and trial-run stages.
Current Execution Status
Each project is shown with its current stage so visitors can understand whether the work is in engineering, manufacturing, dispatch, installation, pre-commissioning or trial-run preparation.
Treatment Technologies Covered
Ongoing work includes sewage treatment, effluent treatment, oil-water separation, RO, DM, UF, filtration, water recycling, reuse and zero liquid discharge solutions.
Site-Based Coordination
Layouts, piping routes, civil readiness, equipment access, electrical panels, instruments and utility connections are coordinated according to actual site conditions.
Commissioning-Ready Delivery
Execution is planned around outlet quality, reuse goals, compliance norms, hydraulic performance, operator safety and long-term serviceability after handover.
How Ongoing Projects Move Forward
How WTE Tracks Live Treatment Projects from Site Study to Commissioning.
Every ongoing project follows a controlled workflow from site study to commissioning readiness.
The treatment process and equipment package are finalized according to inlet quality, flow load, site space, reuse target, discharge requirement and utility availability.
01
Site Survey & Inlet Data Review
Water, sewage or effluent samples, flow variation, peak load, oil & grease, COD/BOD, TDS, hardness, silica and reuse targets are reviewed before finalizing the execution approach.
02
Process Route Finalization
The treatment line is selected as per application — screening, equalization, biological treatment, clarification, pressure filtration, activated carbon, softening, UF, RO, DM, MEE or ZLD where required.
03
Engineering, BOM & Manufacturing
P&ID, GA drawings, tank sizing, pressure vessels, pumps, blowers, dosing systems, valves, instruments, MCC/PLC panels and skid assemblies are prepared and manufactured under quality checks.
04
Dispatch, Site Installation & Piping
Equipment is dispatched stage-wise and installed with interconnecting piping, cable routing, dosing connections, utility tie-ins, platform access and safety clearances as per approved layout.
05
Pre-Commissioning & Trial Run
Hydro testing, flushing, electrical loop checks, dry run, wet run, dosing calibration, membrane protection, biological seeding and automation logic checks are completed before performance trials.
06
Performance Stabilization & Handover
The plant is stabilized for outlet quality, flow rate, pressure, recovery, sludge handling and operator readiness before handover with O&M guidance and service support.
Ongoing Project Focus Areas
Live Treatment Projects Planned for Compliance, Reuse and Reliable Operation.
For WTE, an ongoing project is not only material movement; it is controlled progress across engineering, manufacturing, installation quality, testing and operational readiness.
From process approval to manufacturing, site erection and pre-commissioning, WTE focuses on hydraulic balance, treatment efficiency, automation logic, safety access and long-term plant reliability.
Ongoing STP, ETP, OWS, RO, DM, UF, ZLD and filtration projects are configured to meet discharge, reuse, process-water or recycling targets based on actual application requirements.
Compliance-Focused Treatment Output
Correct pump sizing, pressure loss control, dosing optimization, membrane protection and instrumentation help reduce power use, chemical waste and operating instability.
Energy & Chemical Efficiency
Plants are planned with service access for valves, pumps, blowers, filters, membranes, dosing tanks, instruments and electrical panels so maintenance teams can work safely after commissioning.
Serviceable Plant Layout
Plants are planned with access for valves, pumps, blowers, filters, membranes, dosing tanks, instruments and electrical panels so maintenance teams can work safely and quickly.
Ongoing Project Categories
Ongoing WTE Projects by Treatment Technology and Industry.
Browse the live project categories below to see where WTE work is currently progressing. Each card shares the treatment type, project location, industry segment, capacity and present execution stage.
Oil Water Separator
Heavy Engineering OWS
Current Stage: Manufacturing Stage
Oil Water Separator
Food Processing Oil Trap
Current Stage: Site Installation
Oil Water Separator
Commercial Kitchen OWS
Current Stage: Pre-Commissioning
Oil Water Separator
Petrochemical OWS Package
Current Stage: Piping & Erection
Oil Water Separator
Steel Plant OWS
Current Stage: Panel Integration
Oil Water Separator
Railway Depot OWS
Current Stage: Equipment Dispatch
Oil Water Separator
Logistics Hub OWS
Current Stage: Trial Run Planned
STP / Sewage
Luxury Residential Township STP
Current Stage: Piping & Erection
STP / Sewage
Integrated Housing Society STP
Current Stage: Panel Integration
STP / Sewage
Commercial IT Park STP
Current Stage: Equipment Dispatch
STP / Sewage
Five Star Hotel STP
Current Stage: Trial Run Planned
STP / Sewage
Hospital Campus STP
Current Stage: Engineering Stage
STP / Sewage
Educational Institute STP
Current Stage: Manufacturing Stage
STP / Sewage
Municipal Sewage Treatment Plant
Current Stage: Site Installation
STP / Sewage
Industrial Township STP
Current Stage: Pre-Commissioning
ETP / Effluent
Pharmaceutical ETP Plant
Current Stage: Engineering Stage
ETP / Effluent
Textile Dyeing ETP Plant
Current Stage: Manufacturing Stage
ETP / Effluent
Food Processing ETP Plant
Current Stage: Site Installation
ETP / Effluent
Chemical Industry ETP Plant
Current Stage: Pre-Commissioning
ETP / Effluent
Dairy Processing ETP Plant
Current Stage: Piping & Erection
ETP / Effluent
Automobile Component ETP
Current Stage: Panel Integration
ETP / Effluent
Brewery Effluent Treatment Plant
Current Stage: Equipment Dispatch
ETP / Effluent
Paper Mill ETP Plant
Current Stage: Trial Run Planned
RO / DM / UF
Industrial RO Plant
Current Stage: Piping & Erection
RO / DM / UF
DM Water Plant
Current Stage: Panel Integration
RO / DM / UF
UF Filtration System
Current Stage: Equipment Dispatch
RO / DM / UF
RO + UF Plant
Current Stage: Trial Run Planned
RO / DM / UF
Two Pass RO Plant
Current Stage: Engineering Stage
RO / DM / UF
Softener + RO System
Current Stage: Manufacturing Stage
RO / DM / UF
DM Plant for Power Boiler
Current Stage: Site Installation
RO / DM / UF
Packaged Drinking RO
Current Stage: Pre-Commissioning
ZLD / Reuse
Textile ZLD Plant
Current Stage: Engineering Stage
ZLD / Reuse
Pharma ZLD System
Current Stage: Manufacturing Stage
ZLD / Reuse
Chemical ZLD Plant
Current Stage: Site Installation
ZLD / Reuse
ETP + RO + MEE System
Current Stage: Pre-Commissioning
ZLD / Reuse
Dyeing Unit ZLD
Current Stage: Piping & Erection
ZLD / Reuse
Automobile Reuse Plant
Current Stage: Panel Integration
ZLD / Reuse
Food Industry Reuse Plant
Current Stage: Equipment Dispatch
ZLD / Reuse
Common ZLD Facility
Current Stage: Trial Run Planned
Planning a New Water or Wastewater Treatment Project?
Share your project requirement with WTE for STP, ETP, RO, DM, ZLD, filtration, softening or complete turnkey water treatment plant execution.